wholesale newport cigarettes online

Newport cigarettes raffic between hosts on the 10.0.1.0 network as the data exits the Router A s0 interface en route to site 2 hosts on the 10.0.2.0 network. For traffic from site 1 hosts on the 10.0.1.0 network to site 2 hosts on the 10.0.2.0 network shop nfl jerseys, the ACL entry on Router A is evaluated as follows: source = hosts on 10.0.1.0 network dest = hosts on 10.0.2.0 network For incoming traffic from site 2 hosts on the 10.0.2.0 network to site 1 hosts on the 10.0.1.0 network newport cigarettes website, that same ACL entry on Router A is evaluated as follows: source = hosts on 10.0.2.0 network permit = hosts on 10.0.1.0 network
Copyright ? 2005 wholesale marlboros cigarettes, Cisco Systems, Inc.
Cisco IOS-Based VPNs Using Certificate Authorities
5-83
Step 8?Configure Crypto Maps
This topic describes how to configure crypto maps.
Configure IPSec Crypto Maps
Site 1
10.0.1.3 Router A
A
Router B
Site 2
10.0.2.3
Internet
B
router(config)#
???ì????à 3??? 3???¨(r)2?3? -??￥¨(r)2?3 ?¤??-??¨(r)3?2???? ???ì????à 3??? 3???¨(r)2?3? -??￥¨(r)2?3 ?¤??-??¨(r)?¤-?|ì3?? ???ì2?3?¤? ??ì2?3?¤?¨(r)3???¨(r)2?3?? ??à????????à2o?¤1??y ???ì????à 3??? ¨(r)?¨(r)?D ??e ?¤??-??¨(r)?¤-?|ì3??
? Use a different sequence number for each peer. ? Multiple peers can be specified in a single crypto map for redundancy. ? One crypto map per interface.
? 2005 Cisco Systems, Inc. All rights reserved. SNRS v1.0?5-15
You must use the crypto map global configuration command to create or modify a crypto map entry and enter crypto map configuration mode. Set the crypto map entries referencing dynamic maps to be the lowest-priority entries in a crypto map set (that is, having the highest sequence numbers). Use the no form of this command to delete a crypto map entry or set. The command syntax is as follows:
??à???????à2o?¤1??y ???ì????à 3??? 3???¨(r)2?3? -??￥¨(r)2?3 ?¤??-??¨(r)3?2???? ??à???????à2o?¤1??y ???ì????à 3??? 3???¨(r)2?3? -??￥¨(r)2?3 ?¤??-??¨(r)?¤-?|ì3?? ???ì2?3?¤? ??ì2?3?¤?¨(r)3???¨(r)2?3?? ??à???????à2o?¤1??y 2?à ???ì????à 3??? 3???¨(r)2?3? ?-??￥¨(r)2?3?
A description of each is as follows: map-name: The name that you assign to the crypto map set. seq-num: The number that you assign to the crypto map entry. ipsec-manual: Indicates that ISAKMP will not be used to establish the IPSec SAs for protecting the traffic specified by this crypto map entry. ipsec-isakmp: Indicates that ISAKMP will be used to establish the IPSec SAs for protecting the traffic specified by this crypto map entry. Dynamic: (Optional) Specifies that this crypto map entry references a pre-existing static crypto map. If you use this keyword cheap newports cigarettes carton, none of the crypto map configuration commands are available. dynamic-map-name: (Optional) Specifies the name of the dynamic crypto map set that should be used as the policy template.
5-84 Securing Networks with Cisco Routers and Switches (SNRS) v1.0 Copyright ? 2005, Cisco Systems, Inc.
Example: Crypto Map Commands
Site 1
10.0.1.3 Router A
A
Router B 172.30.2.2 Router C
B B
Site 2
10.0.2.3
Internet
172.30.3.2 ?? wholesale newport cigarettes online!